Radios

[rodrigo]

Crew

What´s the command should I add to panel.cfg to appear radios in the panel. I am asking this because I was in approach procedure in Bermuda and when I tried to tune ILS 30 I simply could not change the frequency of the NAV 1. I wonder adding the command to panel.cfg that make show radio freq would fix it Thanks ;)

[jwenting]

you need to check your aircraft.cfg, not panel.cfg.

From the default 737 (FS2004, should be similar in FSX):

[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1 = 1
Com.1 = 1, 1
Com.2 = 1, 1
Nav.1 = 1, 1, 1
Nav.2 = 1, 1, 0
Adf.1 = 1
Transponder.1 = 1
Marker.1 = 1

[rodrigo]

Hmmm I have this lines in aircraft.cfg:

[Radios]
// Radio Type=availiable, standby frequency, has glide slope
Audio.1= 1
Com.1= 1, 1
Com.2= 1, 1
Nav.1= 1, 1, 1
Nav.2= 1, 1, 0
Adf.1= 1
Transponder.1= 1
Marker.1= 1

Don´t know why I can not change frequencies in the NAV radio. Maybe because I am using our DC-10-30 wich was designed for FS 2002, but it´s just a guess..
Thanks anyway :-)

[Rob D]

Some panels have more than one place to change the NAV frequencies. On the 757 panel I use, the NAV1 freq on the front panel is not clickable, but if I open the pedestal, it is clickable there. Might want to check and see if there is another place to change the frequency, either on a radios panel or another area.

Happy flying!