Tradewind Forums
Aircraft position in FLT file - Printable Version

+- Tradewind Forums (https://www.tradewind.org/forum)
+-- Forum: Tradewind Forums (https://www.tradewind.org/forum/forumdisplay.php?fid=5)
+--- Forum: How to - Where to ? (https://www.tradewind.org/forum/forumdisplay.php?fid=6)
+--- Thread: Aircraft position in FLT file (/showthread.php?tid=161)

Aircraft position in FLT file - Seahopper - 03-29-2009

Another question regarding changing the aircraft starting position to a gate instead of the active runway in the FLT file, where & how do you change that? :(

RE: Aircraft position in FLT file - TCA_tech - 03-29-2009

Seahopper Wrote:Another question regarding changing the aircraft starting position to a gate instead of the active runway in the FLT file, where & how do you change that? :(

Seahopper

Have a look at the drop down list at the bottom of "create flight" in the start up screen/multi choice menu. It's all there, provided, of course that you have an appropriate AFCAD with suitable gate locations.

Cheers
Karl

RE: Aircraft position in FLT file - Seahopper - 03-30-2009

Hi Karl, I am aware of how to change aircraft position upon loading a flight, but how do you change it inside the FLT file.

Thanks

RE: Aircraft position in FLT file - TCA_tech - 03-30-2009

Seahopper Wrote:Hi Karl, I am aware of how to change aircraft position upon loading a flight, but how do you change it inside the FLT file.

Thanks

Seahopper, please define "inside" - I don't know what exactly you are after.

Cheers
K

RE: Aircraft position in FLT file - Seahopper - 03-30-2009

I want to modify the aircraft starting position defined in the FLT file so that when you load the flight, the aircraft will be in the airport position which you want instead of what was already specified by the FLT file creator.

RE: Aircraft position in FLT file - TCA_tech - 03-30-2009

Seahopper Wrote:I want to modify the aircraft starting position defined in the FLT file so that when you load the flight, the aircraft will be in the airport position which you want instead of what was already specified by the FLT file creator.



I see.

You might want to try "Gate Keeper" - available on flightsim.com .

I suppose it provides the functions you are after.

Cheers
K

RE: Aircraft position in FLT file - Seahopper - 03-30-2009

Thanks Karl!

RE: Aircraft position in FLT file - TCA_tech - 03-30-2009

Seahopper Wrote:Thanks Karl!

No Problem - actually (our webmasters willing) I think we should have a collection of "must have" tools, like this one , AfCAD , TTools etc. on our website.


Cheers
K